Pneumatic Polyurethane Specifications

Pneumatic Polyurethane ~ Technical Data / Specifications

• Extremely flexible - even at low temperatures
• Excellent abrasion resistance
• No plasticisers
• Highly elastic - tight bend radii possible
• Excellent operating temperature range
• Hydrocarbon resistant

PRODUCT : COLEX PNEUMATIC POLYURETHANE TUBE WALL : LIGHT / MEDIUM COLOUR : BLUE & BLACK
OD	ID	Working Pressure		Bend Radius	Standard Coil	Colex Part No.
mm	mm	PSI	Bar	mm#	Metres
4	2.5	161	11	6.5	30	PPU4/25
5	3	176	12	8	30	PPU5/3
6	4	147	10	10.5	30	PPU6/4
8	5.5	132	9	20	30	PPU8/55
8	6	102	7	29	30	PPU8/6
10	7	132	9	22	30	PPU10/7
12	8	147	10	50	30	PPU12/8

# For use as a guide only

Back to Pneumatic Range Main Page

Applications
• Pneumatics
• Hydraulics
• Industrial Robotics
• Instrumentation Lines

Pressures**
Values given are based on the short term burst pressure of polyurethane at 20C using a 3:1 safety factor.

Temperatures**
-50C to +80C
Occasional use: up to 120C
Brittle Temperature: -70C

Chemical Resistance
Polyurethane has a good resistance to petrol, other hydrocarbons, gases and many solvents. For more detailed information please contact the Colex Sales Office.

** Whilst every effort is made to ensure the above information is accurate and correct, the conditions under which Colex products are used are beyond our control and therefore our recommendations are made without warranty or guarantee. Colex reserves the right to change specifications without prior notice.

King Industrial Products Ltd

Rectory Lane Trading Estate, Kingston Bagpuize, Nr Abingdon, Oxfordshire. England OX13 5AS
Tel:(01865) 821064 FAX:(01865) 820691 Email:sales@kingindustrial.co.uk