Semi-Rigid Nylon (Metric) Specifications

Semi-Rigid Nylon - Metric ~ Technical Data / Specifications

PRODUCT : COLEX SEMI-RIGID NYLON - METRIC WALL : LIGHT COLOUR : BLACK & NATURAL
OD	ID	Working Pressure		Bend Radius	Standard Coil	Colex Part No.
mm	mm	PSI	Bar	mm#	Metres
4	2.5	640	44	8	30	NRM4/25
5	3	700	48	10	30	NRM5/3
6	4	555	38	13	30	NRM6/4
8	6	400	27	32	30	NRM8/6
10	8	310	21	50	30	NRM10/8
12	10	250	17	60	30	NRM12/10

# For use as a guide only

Back to Pneumatic Range Main Page

Applications

• Pneumatic Controls
• Instrumentation Systems
• Fuels and Oils
• Compressed Air
• Lubrication
• Refrigeration

• Coolant Lines
• Hydraulic Lines
• Air Conditioning
• Chemical Transfer
• Laboratories
• Automotive

Pressures**
Values given are based on the short term burst pressure of nylon at 20C using a safety factor 4:1.
Note: Any increase in temperature above 20C will result in a decline in working pressure values.

Temperatures**
-35C to +110C
Occasional use: up to 140C
Brittle Temperature: -70C
Semi-rigid nylon is heat and light stabilised, thus giving elevated temperature capabilities.

Chemical Resistance
Resistant to most solvents, alkalis, oils, greases, petroleum products, fungi, moulds, and dilute acids (mineral and organic). For more detailed information please contact the Colex Sales Office.

Food Use
Natural semi-rigid nylon contains very little plasticiser and is therefore approved for food applications.

Tolerances** To: BS 5409 Parts 1 or 2

Tube OD mm	Tolerance mm
4 and 5 6 to 16 18 to 22 28	+0.03/-0.12 +0.03/-0.10 +0.03/-0.13 +0.03/-0.15

** Whilst every effort is made to ensure the above information is accurate and correct, the conditions under which Colex products are used are beyond our control and therefore our recommendations are made without warranty or guarantee. Colex reserves the right to change specifications without prior notice.

King Industrial Products Ltd

Rectory Lane Trading Estate, Kingston Bagpuize, Nr Abingdon, Oxfordshire. England OX13 5AS
Tel:(01865) 821064 FAX:(01865) 820691 Email:sales@kingindustrial.co.uk