Oil Resistant Suction Discharge Hose Specifications

Oil Resistant Suction Discharge Hose ~ Technical Data / Specifications

PRODUCT : COLEX OIL RESISTANT SUCTION DISCHARGE HOSE^ COLOUR : BLUE
Nominal ID		Wall Thickness	Weight	Working Pressure		Bend Radius	Standard Coil	Colex Part No.
mm	in	mm	Kg/1m	PSI	Bar	mm	metres
25	1	3.8	0.45	102	7.0	100	30	HDOR100
32	1 1/4	3.8	0.45	102	7.0	115	30	HDOR125
38	1 1/2	3.8	0.63	88	6.0	150	30	HDOR150
51	2	5.5	1.4	103	7.0	255	30	HDOR200
63	2 1/2	6.0	2.1	88	6.0	300	30	HDOR250
76	3	6.5	2.2	73	5.0	355	30	HDOR300
102	4	7.5	3.4	73	5.0	400	30	HDOR400

^Manufactured from PVC Nitrile blend of raw material

Back to Suction Discharge Range Main Page

Applications
Suitable for the suction and discharge of black fuel oils, gas and oils with a low aromatic content, Kerosene, paraffin, diesel oil, Naphalene oil, mineral based hydraulic oils, lubricating oils, greases and talloils.

Pressures*
Values given are based on the short term burst pressure of the hose at 20C based on a 3:1 safety factor.
Note: Any increase in temperature above 20C will result in a decline in working pressure values.

Vacuum*
711mm Hg = 94% at 20C

Temperatures*
-20C + 60C
Cold bend -45C

Chemical Resistance
Resistant to oils and greases listed above. These hoses are not suitable for use with Benzene, petrol, spirits, Xylol, Toluol or solvents containing aromatics. For more detailed information please contact the Colex Sales Office.

*Whilst every effort is made to ensure the above information is accurate and correct, the conditions under which Colex products are used are beyond our control and therefore our recommendations are made without warranty or guarantee. Colex reserves the right to change specifications without prior notice.

King Industrial Products Ltd

Rectory Lane Trading Estate, Kingston Bagpuize, Nr Abingdon, Oxfordshire. England OX13 5AS
Tel:(01865) 821064 FAX:(01865) 820691 Email:sales@kingindustrial.co.uk