Heavy Duty Suction Hose Specifications

Heavy Duty Suction Hose ~ Technical Data / Specifications

PRODUCT : COLEX HEAVY DUTY SUCTION HOSE COLOUR : DARK (BOTTLE) GREEN OR GREY
Nominal ID		Wall Thickness	Weight	Working Pressure		Bend Radius	Standard Coil	Colex Part No.
mm	in	mm	Kg/1m	PSI	Bar	mm	metres
25	1	4.5	0.7	191	13	160	30	HDS100
32	1 1/4	4.5	0.8	147	10	200	30	HDS125
38	1 1/2	5.0	1.0	117	8	225	30	HDS150
51	2	5.5	1.4	102	7	255	30	HDS200
63	2 1/2	6.0	2.1	88	6	300	30	HDS250
76	3	6.5	2.2	88	6	355	30	HDS300
89	3 1/2	7.0	2.9	73	5	375	30	HDS350
102	4	7.5	3.4	58	4	400	30	HDS400
127	5	8.5	4.7	58	4	625	30	HDS500
140	5 1/2	9.0	5.2	58	4	750	30	HDS550
152	6	10.0	6.7	58	4	975	30	HDS600

Back to Suction Discharge Range Main Page

Applications
Heavy duty suction applications in agriculture, industry and construction. Suitable for water, slurry, sewage, some solids and granules, and gases.

Pressures*
Values given are based on the short term burst pressure of the hose at 20C based on a 3:1 safety factor.
Note: Any increase in temperature above 20C will result in a decline in working pressure values.

Vacuum*
711mm Hg = 94% at 20C

Temperatures*
-25C + 60C
Cold bend -45C

Chemical Resistance
Resistant to most oxidising and reducing agents and diluted acids and alkalis. For more detailed information please contact the Colex Sales Office.

*Whilst every effort is made to ensure the above information is accurate and correct, the conditions under which Colex products are used are beyond our control and therefore our recommendations are made without warranty or guarantee. Colex reserves the right to change specifications without prior notice.

King Industrial Products Ltd

Rectory Lane Trading Estate, Kingston Bagpuize, Nr Abingdon, Oxfordshire. England OX13 5AS
Tel:(01865) 821064 FAX:(01865) 820691 Email:sales@kingindustrial.co.uk