Medium Duty Suction Hose Specifications

Medium Duty Suction Hose ~ Technical Data / Specifications

PRODUCT : COLEX MEDIUM DUTY SUCTION HOSE^ COLOUR : OLIVE GREEN
Nominal ID		Wall Thickness	Weight	Working Pressure		Bend Radius	Standard Coil	Colex Part No.
mm	in	mm	Kg/1m	PSI	Bar	mm	metres
25	1	4.0	0.45	117	8	125	30	MDS100
32	1 1/4	4.0	0.57	102	7	150	30	MDS125
38	1 1/2	4.0	0.67	88	6	175	30	MDS150
51	2	4.5	1.0	88	6	225	30	MDS200
63	2 1/2	5.0	1.4	73	5	305	30	MDS250
76	3	5.5	1.8	58	4	355	30	MDS300
89	3 1/2	5.5	2.4	58	4	375	30	MDS350
102	4	6.5	2.6	58	4	430	30	MDS400
127	5	7.0	3.5	44	3	500	30	MDS500
152	6	8.0	4.9	44	3	760	30	MDS600

^Approximately 15% lighter than Heavy Duty Suction Hose

Back to Suction Discharge Range Main Page

Applications
General pumping and suction applications in agriculture, industry and construction. Conveyance of water, sludge, slurry, chemicals and other waste matter.

Pressures*
Values given are based on the short term burst pressure of the hose at 20C based on a 3:1 safety factor.
Note: Any increase in temperature above 20C will result in a decline in working pressure values.

Vacuum*
680mm Hg = 90% at 20C

Temperatures*
-15C + 65C
Cold bend -45C

Chemical Resistance
Resistant to most oxidising and reducing agents and diluted acids and alkalis. For more detailed information please contact the Colex Sales Office.

*Whilst every effort is made to ensure the above information is accurate and correct, the conditions under which Colex products are used are beyond our control and therefore our recommendations are made without warranty or guarantee. Colex reserves the right to change specifications without prior notice.

King Industrial Products Ltd

Rectory Lane Trading Estate, Kingston Bagpuize, Nr Abingdon, Oxfordshire. England OX13 5AS
Tel:(01865) 821064 FAX:(01865) 820691 Email:sales@kingindustrial.co.uk