Colex TPE Delivery Hose Specifications

Colex TPE Delivery Hose ~ Technical Data / Specifications

PRODUCT : COLEX TPE DELIVERY HOSE^ COLOUR : WHITE
Nominal ID		Wall Thickness	Working Pressure		Standard Coil	Colex Part No.
mm	in	mm	PSI	Bar	metres
19	3/4	3.2	88	6.0	30	STH075
25	1	3.8	73	5.0	30	STH100
32	1 1/4	3.8	68	4.5	30	STH125
38	1 1/2	3.8	60	4.0	30	STH150
51	2	4.1	44	3.0	30	STH200

^Manufactured from a new range of raw materials called Thermoplastic Elastomers (TPE)
^TPEs are polymers which combine some of the properties of rubber with the processability of thermoplastics
^Greater flexibility than PVC
^No plasticisers, therefore excellent UV resistance
^Extremely low odour permeability through the hose wall (far less porous than PVC)

Back to Suction Discharge Range Main Page

Applications
Delivery and light suction of most materials. Particularly suited to situations where subjected to direct sunlight or higher temperatures. The low odour permeability of Colex TPE delivery hose makes it an ideal material for carrying products where odour is a problem; i.e. toilet hoses on boats and caravans etc.

Pressures*
Values given are based on the short term burst pressure of the hose at 20C based on a 3:1 safety factor.
Note: Any increase in temperature above 20C will result in a decline in working pressure values.

Temperatures*
-20C + 100C

Chemical Resistance
Resistant to most oxidising and reducing agents and diluted acids and alkalis. For more detailed information please contact the Colex Sales Office.

*Whilst every effort is made to ensure the above information is accurate and correct, the conditions under which Colex products are used are beyond our control and therefore our recommendations are made without warranty or guarantee. Colex reserves the right to change specifications without prior notice.

King Industrial Products Ltd

Rectory Lane Trading Estate, Kingston Bagpuize, Nr Abingdon, Oxfordshire. England OX13 5AS
Tel:(01865) 821064 FAX:(01865) 820691 Email:sales@kingindustrial.co.uk